| Customization: | Available |
|---|---|
| After-sales Service: | Spare Parts Warranty |
| Warranty: | Spare Parts Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| HBT100 Main Technical Parameters | |
| Suitable rods diameter | 80-200mm |
| Chain section | 8 section*2 |
| Pump flow | 8L/min |
| Working pressure | 25pa |
| Pump station Power | Motor: 2.2KW Diesel: 5HP(Choose one of the two) |
| Three-phase supply | 380V |
| Disconnected torque | 100KN.m |
| Connected torque | 80KN.m |
| Weight | 500kg |
| Dimension | 1000x800x700 |
1.The oil tank capacity of the pump station is 30L. add L-HM46 or 68 new hydraulic oil to oil label display.
2.Connect to three-phase power, the motor fan rotates clockwise correctly.
3.Add and subtract chain links according to the diameter of the clamp drill rods .
4.C handle is the main clamp to tighten or loosen , forward loosen and back tighten.
5.B handle is the back clamp to tighten or loosen, forward loosen and back tighten.
6.A handle is loose or tight buckle , positive buckle, forward loosen and back tighten.
7.Adjust the system pressure according to the drill rods torque size, up to 25Mpa.
8.When the horizontal and vertical work change, replace the position of the trolley frame fixing bolt.
9.The pump station is installed on the trolley for the transportation of small wheels when used.
10.Pump station motor or diesel engine can only choose one.
){kind=link}