Xz13600 Trenchless Horizontal Directional Drilling Rig

• Customization: Available
• Warranty: 1 Year
• Condition: New
• Model NO.: XZ13600 HDD
• Drill Hole Diameter: 200-1350mm
• Drill Hole Depth: 30-50m
• Bit Type: Cone Bit
• Drilling Way: Rotary
• Type: Crawler
• Engine: Cummins
• Application 1: Telecom Fiber Laying
• Application 2: Sewage Pipe Laying
• Application 3: Oil Pipe Laying
• Working Type: Trenchless
• Local Service: Some Country Available
• Shipping Way 1: 45ton Below by Container
• Shipping Way 2: 68ton Above by Rollroll
• Transport Package: Bulk
• Specification: Horizontal
• Trademark: YICHAO
• Origin: China
• HS Code: 8430691900
• Production Capacity: 100/Month

Product Description

 

Product Model:XZ13600 Horizontal Directional Drill
XZ13600 HDD used modularize design and separated main machine, structure adopts crawl chassis, control house is available. It uses the power saving closed hydraulic system, equipped with electro-hydraulic proportion control, efficient advanced load sensitivity.
The main technical specifications reach the leader level in international. The main components of hydraulic system, transmission, electric system and gearbox are made of world first-class brand products, good performance, good reliability.

1. Features Introduction of XZ13600 HDD
1.1 Numerical meter display the working torque, push or pull force and so on parametric in working conditions. Electronic sensor has rapid reaction and can show overload immediately. It also endures accuracy and delay of the traditional hydraulic meter's indication. It solve the matter to depend the operator to calculate the torque and force by the equipment's switch directive.
1.2 Equipped with closed energy-saving circuit, load sensing control, electro-hydraulic proportional control and other advanced technology, Using the international famous brand components, reliable quality.
1.3 Four power system, any engine start can complete all the action of the vehicle. Cummins Engine, powerful, ample power reserves to meet drill construction in different working conditions.
1.4 Drill frame adjust by cylinder, work angle change more easy, safe.
1.5 The clamp has two group with eight cylinder clamping so that drill pipe clamping reliable and shackle torque is enough. Full floating clamp, across diameter is φ400mm, clamping and reliable.
1.6 Sliding, rotating system multiple output, modular common rail fuel system and electronic control module, system energy saving, high efficiency of construction, efficiency increased more.
1.7 Modular combination and disassembly and transportation technology, chassis, drill frame, carriage can be disassembled. Power station, operating room meet container transport specifications, transport convenient, low cost.

2. Technology Introduction
2.1 Chassis
XZ13600 HDD adopts crawl chassis. It can fitted to more kind of ground and has high reliability. The travel gearbox producing by world first-class brand make it possible of good performance, good reliability.

Length of track	6140 mm
Width between two tracks outside	3400 mm
Width of track	700 mm
Distance between wheel's axis	5175 mm
Number of track roller	12×2
Gearbox of travelling	Rexroth GFT110×2
Drive force	385kN
Gradient	30°
Travelling speed	1km/h
Ground pressure	1km/h

 
2.2 Engine
Power unit: the powerful engine has the turbine torque increment characteristic is made by Cummins. It meets for the request of China Stage III.

Model of engine	QSZ13-C550
Rated power	4× 410kW/(1900r/min)
Max torque of engine	2300 N·m /(1200~1700r/min)
Rated speed of engine	China Stage
Capacity of fuel	3000L

Engine on chassis.:The powerful engine has the turbine torque increment characteristic is made by Cummins. It meets for the request of China Stage III

Model of engine	QSB5.9-C210
Rated power	154kW/(2200r/min)
Max torque of engine	820N·m /(1400r/min)
Rated speed of engine	2200 r/min
Emission of engine	China Stage
Capacity of fuel	170L

2.3 Hydraulic system
Rotation adopts the open hydraulic system. The movements of push or pull adopt load sensitivity technology. World first-class brand's components can provide good performance and good reliability.

1)Rotation system

Pump	5× Rexroth A11L 260
Rate of flow	2470L/min
Pressure	350bar
Motor	6×Rexroth A6VM200

2)Push and pull system
 

Pump	6×Rexroth A11L260
Rate of flow	2964L/min
Pressure	350bar
Motor	16×Rexroth A6V M200
Main valve	AMCA PR-3211-B05

3)Clamp system
 

Pump	Rexroth A11L260
Rate of flow	320L/min
Pressure	350bar
Clamp  clyinder	8×220
Clamp valve	AMCA PR-3211-B05

4)Push and pull system

Pump	Rexroth A11L190
Rate of flow	399L/min
Pressure	350bar
Motor	2×Rexroth A2FE125
Manual reset relay	AMCA APV22

 

5)Assistant system

Pump	1×Rexroth A11L190
Rate of flow	60L/min
Pressure	350bar

6)Cooling system

Cooling power	4×150kW
Rate of flow	4×458L/min

2.4 Electronic system
The HDD adopts intelligent and CAN bus control technology. The meter shows clearly and easy to see.
The HDD shows the actual torque and push or pull force immediacy in the large and high showing size monitor automatic.
PLC control technology can detect the engine speed, the temperature of cooling water, the pressure of lubrication, the temperature of hydraulic oil, the pressure or stoppage of filter element, the position of carriage etc. It can also alarm to the operator in wrong condition.
The HDD travel safety at stepless speed regulation and controlled by wire cable.

The multi-speed control of rotation and push or pull make HDD be suitable to the complex
geology.
Voltage of electronic	DC24V
Battery	VARTA  6-QW-120B
Controller	Rexroth
Monitor	MURPHY
Handle of rotation	P+G
Sensor of speed	Rexroth
Switch of sensor	Honeywel
Switch of route	Honeywel
Sensor of temperature	Danfoss
Sensor of pressure	Danfoss

 2.5 The entry angel is changed by adopting the link weldment and cylinder. It has the advantage of simple and safety.
The drill frame is made by high tension steel. The pipe support is used in adding or take off the pipe. It is easy to operation and clip. It is convenient for the reason of the drill frame slide by the cylinder.

The distance of the drill frame slid	3000 mm
The length of the drill frame	18600 mm
Entry angle adjust by drill frame	8~16°

 
2.6 Carriage
Push or pull is executed by rack and pinion. The HDD also use the floating axis to protect the pipe's thread. The rapid speed is carried out by the variable motor. The speed of carriage and the force of push or pull can be executed steplessly.

Push/pull force

1360kN

Carriage speed	32m/min
Torque	260000N·m
Spindle speed	100r/min
Distance of carriage moving	12000mm
Gearbox of rotation	16×Brevini S600L3
Gearbox of rotation	6×Brevini ED2250

2.7 Clamp
The HDD is fitted with the clamp so that the pipe can be gripped tightly. The clamp can move from the end of drill frame to another end of the drill frame. And it can do great good to operation in cathead condition. The fixed wise and rotation wise can separate or integrate. It has a good sight of clamp and is good to change the tooth.

Torque of clamp	450000N·m
Rotation angle	15°
Distance of clamp separation	400mm
Across diameter	φ400mm

2.8 Control room (optional)
Independent control room, with air condition can lift and go down by cylinder. It is also fitted with light, windscreen wiper, sunshade curtain, damping seat and suit for operation. All these increase comfortable while operating the HDD.

Import Voltage	AC 220V
Length of control room	2991/5982mm
Width of control room	2438mm
Hight of control room	2591mm

2.9 Loader Crane(optional)
The HDD is assembled 10t Loader Crane. It was controlled by hand and It operate vey convenience.  
Weight of lift 10t 
2.10 Pipe and tools (optional)
Petrol pipe and No-dig pipe is available. Water wing backreamer, expander backreamer, compact fluted backreamer or the others special tools is available. The diameter is 400mm to 2000mm, The max distance which can deal with is 2500m. The customer should determine what kind of tools, joint, swivel will be used depend on the geology at the operation site.

Diameter of pipe	φ219/φ254mm
Length of pipe	9600mm
Joint of pipe	HY77

Note. The force and torque on the pipe can't reach to max at the same time. Please to obey the rules of the pipe. This can avoid the thread cement of the pipe.

3. Main technical parameters

Item					Unit				Parameter
Power house Engine				Manufacturers					Cummins
				Type					QSZ13-C550
				Rated power	kW/(rpm)				4×410/1900
Mainframe Engine				Manufacturers					Cummins
				Type					QSB5.9-C210
				Rated power	kW/(rpm)				154/2200
Thrust-Pull				Max thrust-pull force	kN				13600
				Max thrust-pull speed	m/min				32
Rotation				Torque	N·m				260000
				Max spindle speed	r/min				100
Pipe				Diameter × Length	mm				Φ219/Φ254×9600
Max inclination angle					°				16
Loader Crane				Lifting weight	t				10
				Loading capacity	t•m				25
Travel driving				Type					Steel crawel self-propelled
				Traveling speed	km/h				1
				Gradeability	%				30
Mainmachine dimension					mm				20000×3400×4700
Mainmachine Weight					t				135
Power house dimension					mm				9117×2438×2591
Power house Weight					t				26.5
Handling room(option)					mm				2991/5982×2438×2591
Handling room Weight					t				3

 
4. Core parts subsidiary

Name	Manufacturer
Engine(Power house)	Cummins
Engine(Mainframe)	Cummins
Pump	Rexroth
Main valve	AMCA
Push Motor	Rexroth
Push reducer	Brevini
Rotary Motor	Rexroth
Rotary reducer	Brevini
Handle	P+G
Walking pump	Rexroth
Walking valve	AMCA
Walking speed reducer	Rexroth
Walking motor	Rexroth
Loader Crane
Hydraulic tubing

5. The Machine Appearance and Transportation

The machine work Dimension	22500×3400×7000
The machine transportation Dimension	20000×3400×4700
Shiping weight(free of Drill and Drilling Tools)	126t
Power house weight	26.5t
Handling room weight	3t

6.Transport program
To meet the requirements of highway transportation, apart for the transport of three parts: upper part of the truck and Chassis. Chassis includes Engine, Hood, Cab, link weldment, Fuel Tank. Two part of the truck includes Drill Frame, Clamp, Anchor, Loader Crane etc.Other is carriage.

Dimension of the Carriage(L×W×H)	9300×2080×1960
Weight	About 50t 48t

Dimension of the Drill frame(L×W×H):	20500×3400×3150
Weight:	about  50t

Dimension of the Chassis(L×W×H):7150×3400×1945
Weight: about 28t

7. Accompanied Attached Documents
XZ13600 HDD machine start when accompanied by the packing list, include the following technical documents
Product certificate 
Product Manual
Engine Specification
Operation and Maintenance Manual of Loader Crane
Packing List (including wearing parts and spare parts inventory, vehicle tools inventory, shipping list with items)